Power Supplies commercial applications Video Amplifier Splitters Audio Distribution Amplifiers Ground Vehicles - Commercial and Military Surface Ships
Video Amplifiers   |   Audio Amplifiers   |   Power Supplies   |   Electronic Blanking Units   |   Electronic Systems

Brick Units

Dual Video Amplifier Model ADV 301 13a ADV 301 103 3a Brick Units ADV-301-13A and ADV-301-103-3A Pictured

Dual Video Amplifier Model ADV 301 13a
ADV 301 103 3a Bricks Units

The ADV-301-13A Video Amplifier is a broadband amplifier with flat frequency response from 30 Hz to 30.0 MHz. This Video Amplifier was originally designed for missile applications and is now used extensively in fighter, helicopter, UAV, fixed wing aircraft and military ground vehicle applications. The Model ADV-301-13A has a differential input and two single ended outputs with separate gain controls. More than 500 units have been delivered to major platform prime manufacturers.


The Outline and Mounting Drawing for the ADV-301-13A (one in, two out) and ADV-301-103-3A (one in, three out) Video Amplifiers are attached. These designs represent a family of Brick units with different power and video connectors, and electrical configurations but with the same O&M, functional, and environmental characteristics. A matrix of the current configurations is included with this data sheet. Eon can configure the Brick units with any additional configuration desired.

Eon has also designed and developed a line of Compact units that have similar functional characteristics but are housed in lower profile chassis and have different power, video connector configurations and no user gain control. They are described in a separate data sheet.

Electrical Specifications for Standard ADV-301-13A Unit

  • Input Type: Differential
  • Input Impedance: 75 Ohm Standard.
  • Input Signal Amplitude: 0.5 to 5.0V peak-to-peak
  • Input Overload: 10V peak-to-peak
  • Phase Characteristics: Non-Inverting
  • Outputs: Two Single Ended
  • Output Impedance: 75 Ohm Standard.

  • Two single ended outputs with 75 ohm output impedance Other impedances available. Specify when ordering. See Current Produced “Brick” Summary

ADV-301-13A and ADV-301-103-3A Pictured

  • Output Signal Ground: Tied to chassis ground.
  • Output Signal Amplitude: Single ended outputs 0.5V to 3.0V peak-to-peak.
  • Gain adjustable 0.25-2. Maximum amplitude 3V peak-to-peak.
  • Bandwidth: Flat within ± 0.4dB from 30Hz to 30.0MHz at 1V peak-to-peak output, gain = 1.
  • Noise: 0.01 peak-to-peak at 1V peak-to-peak output, gain = 1.
  • Harmonic Distortion: Less than 2.5% at 1V peak-to-peak output, gain = 1.
  • Gain Stability: Less than 5% over temperature.
  • Primary Power: Voltage: 28 VDC Nominal, 18-36 VDC Current: Less than 100 milliamps. Ripple: Less than 1.5V peak-to-peak. Reverse Polarity Protection: Provided. 50 VDC Transient @ 100mSec
  • Operating Life: 82,000 hours in specified operating environments

Environmental Specifications:

  • Temperature:-40 degrees C to 70 degrees C. -50 degrees C to 70 degrees C non-operating.
  • Altitude: 0 – 50,000 feet.
  • Humidity: 0 – 95% Relative Humidity, -30 degrees C to 55 C, non-condensing
  • Vibration: Vibration: Mil Std-167, Type 1 Equipment
  • Cooling: Conduction, through base plate
  • Shock: 20 g´s for 6-9 mS duration, any axis.

Click Images Below for larger view

Dual Video Amplifier Model ADV 301 13a Brick Units

Dual Video Amplifier Model ADV 301 13a Brick Units

Dual Video Amplifier Model ADV 301 13a Brick Units

(818) 781-2185