Power Supplies commercial applications Video Amplifier Splitters Audio Distribution Amplifiers Ground Vehicles - Commercial and Military Surface Ships
Video Amplifiers   |   Audio Amplifiers   |   Power Supplies   |   Electronic Blanking Units   |   Electronic Systems

Brick Units

Dual Video Amplifier Model ADV 301 13a ADV 301 103 3a Brick Units

Dual Video Amplifier Model ADV 301 13a
ADV 301 103 3a Bricks Units

The ADV-301-13A Video Amplifier is a broadband amplifier with flat frequency response from 30 Hz to 30.0 MHz. This Video Amplifier was originally designed for missile applications and is now used extensively in fighter, helicopter, UAV, fixed wing aircraft and military ground vehicle applications. The Model ADV-301-13A has a differential input and two single ended outputs with separate gain controls. More than 500 units have been delivered to major platform prime manufacturers.


Learn More...


Compact Video Amplifier Series

Compact Video Amplifier Series


Compact Video Amplifier Series Model & Part Numbers:
ADV-301-22, 12981-300 (1 in 2 out)
ADV-301-23, 12980-300 (1 in 3 out)
ADV-301-24, 13500-300 (1 in 4 out)
ADV-301-16, 12940-300 (1 in 6 out)

The ADV-301-Compact Series has a variety of Video Amp/Splitters. The system is operated with nominal 28 VDC input power. Input and output impedance is 75 ohms for the basic series. Video returns are common to chassis ground. All independent outputs are unity gain from video in. Different input and output impedances are available upon request, and can be integral with chassis ground as well as different fixed gains from video in. Eon also manufactures units with individual user adjustable gain for each output.

Learn More...

Model ADV-301-16 Video Distribution Amplifier

The Eon Model ADV-301 -16 Video Amplifier is a broadband amplifier with essentially flat frequency response from 30Hz to 30.0MHz. This Video Amplifier was designed primarily for video data transmission in a military environment


Click here for specifications and pdf download.


Video Switch Assembly Model VSA-103

The Video Switcher Assembly is designed for use in a light armored vehicle. Its mission is to switch various video images between monitors operated by the troops. Each monitor shall accept multiple video sources, selectable by the troops. This includes: two channels for the remote weapon station day and night sights, plus two spare channels for future Driver Vision Enhancement DVE, and two spare channels for future feeds, for a total of six channels. The monitor shall be capable of displaying RS-170A images from the sources identified above. The six output channels accept composite NTSC or PAL video from up to six sources. Each of the six multiplexers can select any of six independent video sources. Each operator is required to have a Remote Video Selector from which they can select any of the six video sources for viewing on their monitor


Click here for specifications and pdf download.


Model ADV 301-31 Airborne Video Amplifier

The ADV-301-31 Video Distribution Amplifier provides the capability of amplifying and distributing RS-170 monochrome video from a RBG input device such as a FLIR or Digital Moving Map and composite color video from a CCD camera in RS-170 RGB format with sync on green. The Video Amplifier shall provide an input for the RS-170 IR video and RGB video signal, amplify the signals and provide five outputs for each video signal suitable for display on four cockpit MFDs and one video recorder. The ADV-301-31 shall be compatible and operate with 28VDC aircraft power designed to the requirements of MIL-STD-704A.


Click here for specifications and pdf download.


Dual Video Amplifier Model ADV-301-13A

The Eon Model ADV-301-13A Video Amplifier is a broadband amplifier with essentially flat frequency response from 30 Hz to 30.0 MHz. This Video Amplifier was originally designed for missile applications but is now also used extensively in aircraft, ground vehicle and homeland security applications. The Model ADV-301-13A has a single ended input and two single ended outputs with separate gain controls.



Click here for specifications and pdf download.

Triple Video Amplifier Model ADV-301-103

The Eon Model ADV-301-103 Video Amplifier is a broadband amplifier with essentially flat frequency response from 30 Hz to 30.0 MHz. This Video Amplifier was originally designed for missile applications but is now also used extensively in aircraft, ground vehicle and homeland security applications. The Model ADV-301-103 has a single ended input and three single ended outputs with separate gain controls.


Click here for specifications and pdf download.

Dual Video Amplifier Model ADV-301-107-2

The Eon Model ADV-301-107-2 Video Amplifier is a broadband amplifier with essentially flat frequency response from 30 Hz to 30.0 MHz. This Video Amplifier was originally designed for missile applications but is now also used extensively in aircraft, ground vehicle and homeland security applications. The Model ADV-301-107-2 has a single ended input and two single ended outputs with separate gain controls.


Click here for specifications and pdf download.


Two Output Airborne Video Distribution Amplifier
Model ADV-301-111

In situations where new applications require transmission, recording, displaying or splitting of video signals, the EON video signal amplifier module is specifically designed for the airborne environment. The amplifier is proven in the flight test arena withstanding the stringent environmental requirements of Mil Std 810E.


Click here for specifications and pdf download.


Dual Video Amplifier Model ADV-301-123

The Eon Model ADV-301-123 Video Amplifier is a broadband amplifier with essentially flat frequency response from 30 Hz to 30.0 MHz. This Video Amplifier was designed primarily for NTSC video data. The Model ADV-301-123 has three single ended inputs, each of which has two single ended outputs with separate gain controls.


Click here for specifications and pdf download.


Airborne Video Distribution Amplifier Model ADV-301-150

The EON Model ADV-301-150 Video Amplifier is a broadband amplifier with essentially flat frequency response from 30 Hz to 10.0 MHz. This amplifier was originally designed for missile TV video data, but it can also be used in other applications. The Model ADV-301-150 has a single ended input and 15 single ended outputs.


Click here for specifications and pdf download.


AGC – Video Amplifier System Model H-132-6A

The AGC / Video Amplifier has two modes of operation: Automatic Gain Amplification and Video Selectable from a switch. In the AGC mode, the gain of the amplifier is dependent on the received signal amplitude whereby the AGC will maintain a constant output amplitude of one volt RMS over the dynamic input range of one volt peak to peak to 7 volts peak to peak.


Click here for specifications and pdf download.


VS-106

The model H-132-6A AGC-Video Amplifier meets today’s high frequency band instrumentation requirements. Each AGC-Video Amplifier has six separate isolated outputs for driving several devices from a common source. Two amplifiers are housed in a single Model VS-106 chassis with a common power supply. Each AGC-Video Amplifier is a removable plug-in unit with front panel meter, test points and controls.


Click here for specifications and pdf download.


Video Selector Amplifier System Model VSAS

The VSAS (Video Selector Amplifier System) was developed to enable users at remote locations to view information from up to six different video sources. The VSM-102 is a dual, 6-1 video multiplexer which accepts NTSC video information from up to six sources. Each of the 6-1 multiplexers can select any of the six video sources independent of each other.


Click here for specifications and pdf download.


Video Multiplexer Model VM-102

The Model VM-102 Video Multiplexer will accept up to five standard NTSC video inputs and then combines horizontal fractional segments of these five video signals into one standard composite video format. The video multiplexer's output, when observed on a monitor, will be a single video raster comprised of horizontal sections of video from the five video sources.


Click here for specifications and pdf download.


VSM-101

The VSM-101 can be used in virtually any situation where incoming video data is buffered, selected and switched to a desired output for telemetry or recording. It is ruggedized and easily mounted for airborne, land and sea applications. Connector pins are provided for operator control through a low level TTL or control box switch closure to simply select up to six RS170 video data input sources.


Click here for specifications and pdf download.


VSM-102 Video Selector Amplifier Module

The VSM-102 can be used in virtually any situation where incoming video data is buffered, selected, amplified and switched to each of two desired outputs for monitoring, telemetry or recording. It is ruggedized and easily mounted for airborne, land and sea applications. Pin outs are provided for operator control through a low level TTL or control switch closure to simply select two outputs from six NTSC video data input sources.


Click here for specifications and pdf download.

(818) 781-2185