Dual Video Amplifier Model ADV-301-123

Ground Vehicles - Commercial and Military

Video Amplifiers | Audio Amplifiers | Power Supplies | Electronic Blanking Units | Electronic Systems

Dual Video Amplifier Model ADV-301-123

The Eon Model ADV-301-123 Video Amplifier is a broadband amplifier with essentially flat frequency response from 30 Hz to 30.0 MHz. This Video Amplifier was designed primarily for NTSC video data. The Model ADV-301-123 has three single ended inputs, each of which has two single ended outputs with separate gain controls.

Specifications PDF

Electrical Specifications:
• Input Type: Single ended.
• Input Impedance: 75 Ohm Standard.
• Input Signal Amplitude: 0.5 to 5.0V peak-to-peak
• Input Overload Protection: 10V peak-to-peak
• Phase Characteristics: Non-Inverting
• Signal Configuration: Three individual inputs, each with corresponding two outputs

                                   Other impedances available.

• Signal Ground: Tied to chassis ground.
• Output Signal Amplitude: Single ended outputs 0.5V to 3.0V peak-to-peak. Gain
                                         adjustable 0.25-2. Maximum amplitude 3V peak-to-peak.
• Bandwidth: Flat within ± 0.4dB from 30Hz to 30.0MHz at 1V peak-topeak output, gain = 1.
• Noise: 0.01 peak-to-peak at 1V peak-to-peak output, gain = 1.
• Harmonic Distortion: Less than 2.5% at 1V peak-to-peak output, gain = 1.
• Gain Stability: Less than 5% over temperature.
• Primary Power: Voltage: 28 DC Nominal, 18-36 VDC
                           Current: Less than 1 ampere.
                           Ripple: Less than 1.5V peak-to-peak.
                           Reverse Polarity Protection: Provided.
                           50 VDC Transient @ 100Ms
• Operating Life: 10,000 hours in specified operating environments

Environmental Specifications:
• Temperature: -30 degrees C to 70 degrees C.
                        -50 degrees C to 70 degrees C non-operating.
• Altitude: 0 – 30,000 feet.
• Humidity: 0 – 95% Relative Humidity, -30 degrees C to 55 C, non-condensing
• Vibration: Vibration: Double Amplitude, Sinusoidal
                   excitation of 0.1 inches from 5 Hz to 20
                   Hz, and ±2 g’s between 20 Hz and 500 Hz.
• Cooling: Conduction, through base plate
• Shock: 20 g’s for 6-9 mS duration. Any axis.

Mechanical Specifications:
• Size: Depth 5.030” Max, Width 6.780” Max, Height 2.700” Max.
• Weight: Weight: < 3 LBS.
• Mounting: Mounting: 6 each 0.169 diameter through holes.
• Input Power Connector: (J1) PT02E-8-2P
                                        Pin A: +28 VDC
                                        Pin B: 28V return and chassis ground.
• Video Input Connector: (J2, J3, J4) BNC
• Video Output Connectors: (J5-J6, J7-J8, J9-J10) BNC

Other connectors available. Specify when ordering.

(818) 781-2185