|
Electrical Specifications:
Input Type: Single ended.
nput Impedance: 75 Ohm Standard.
Input Overload Protection: >5V peak
Phase Characteristics: Non-Inverting
Signal Configuration: one individual input, six individual output
Signal Ground: Tied to chassis ground.
Output Signal Amplitude: Single ended outputs 0.5V to 3.0V peak-to-peak.
Bandwidth: Flat within ± 0.4dB from 30Hz to 30.0MHz at 1V peak-to peak output, gain = unity at 75 Ohms
Noise: 0.01 peak-to-peak at 1V peak-to-peak output, gain = 1.
Harmonic Distortion: Less than 2.5% at 1V peak-to-peak output, gain = 1.
Gain Stability: Less than 5% over temperature.
Primary Power: Voltage: 28 DC Nominal, 18-36 VDC
Power dissipation: 3 watts
Reverse Polarity Protection: Provided.
80 VDC Transient @ 100Ms
Operating Life: 50,000 hours in specified operating environments
Environmental Specifications:
Temperature: -40 degrees C to 70 degrees C.
-40 degrees C to +85 degrees C non-operating.
Altitude: 0 - 50,000 feet.
Humidity: 0 - 95% Relative Humidity
Vibration: Vibration: Double Amplitude, Sinusoidal excitation of
0.1 inches from 5 Hz to 20 Hz, and 2 g's between 20 Hz and 500 Hz.
Cooling: Conduction, through base plate
Shock: 20 g's for 6-9 mS duration. Any axis Operating
40 g's for 6-9 mS duration. Any axis Non-Operating
Mechanical Specifications:
Size: Depth 4.03, Width 6.78" Max, Height 1.93" Max.
Weight: Weight: < 2 LBS.
Mounting: Mounting: 4 each 0.156 diameter through holes.
Input Power Connector: (J1) D38999/20WA98PN
Pin A: +28 VDC
Pin B: 28V return
Pin C: Chassis Gnd
Video Input Connector:(J2) BNC
Video Output Connectors: (J3, J4, J5, J6, J7, J8) BNC
| |
